O RING VULCANIZING KIT - (INCH) 0.070" to 0.50" die. Kit includes:
- 19" tool box
- aluminum work board
- cartridge heater (120 VAC - 100 Watt*)
- On/Off and Hi/Low control knob
- one (1) 8-position vulcanizing die with built-in cord cutting jig (integral in die body)
- utility knife, marking pen, glove, cooling pan
Inch sizes in Die include 0.070" 0.103" 0.139" 0.210" 0.275" 0.312" 0.375" and 0.50". Metric or Custom Dies may be purchased separately. All Dies are interchangeable.
Here's one of the most practical, time saving, widely used devices for industry ever manufactured.You can professionally make high temperature and chemical resistant O Rings to the exact size you need - in either inch or metric (up to 0.50" or 5.7 mm).
NOT A STICKY KIT
A vulcanized O Ring produces a bond with greater elasticity and strength due to molecular bonding. It is the highest quality for dynamic and static services.
INCH AND METRIC CAPABILITY AND MUCH MORE
The vulcanizing die is available in a choice of inch and metric sizes. The kit vulcanizes other materials as well, including Buna N, Fluorel , Silicone, Nordel (EPR), Neoprene, Nitrile, and EPDM. The heater control is available in either 120VAC or 240VAC 100W versions.
NO SPECIAL SKILLS REQUIRED
The Viton O Ring Heater was designed specifically for ease and speed of operation. Complete easy-to-follow instructions with clear step-by-step drawings are included in each kit. The onboard temperature controller makes it a snap. Put your O Ring in the die, turn knob to High for 13 minutes then turn to Low for 7 minutes. Making O-Rings couldn't be easier.
EACH KIT INCLUDES EVERYTHING YOU NEED
- 19" Toolbox to Carry Complete Kit
- Complete Workboard with Controller
- Heating Element and Temp Control
- Vulcanizing Die (inch, metric, or custom)
- Cutting Knife
- Cooling Container
- Glove and Marking Pencil
Standard English 8 slot die available with 0.070" 0.103" 0.139" 0.210" 0.275" 0.312" 0.375" 0.50"
Standard Metric 5 slot die available with 1.6mm 2.4mm 3.0mm 4.0mm 5.7mm
Special custom dies available in inch or metric sizes - any number of slots up to 8 positions inch or 5 positions metric with a total cross section maximum of 3.5" / 87mm
Blank Die - DIY (Drill It Yourself)
Total Cross Section available to 3.5" (87.5mm)
This is a SOLID rubber bonding formula. All you add is toluene or MEK. This means it can be shipped as a NON-FLAMMABLE. Once agitated into a viscous solution - it is ready to use. Bonds EPDM, Buna-N, and Neoprene. Solid and liquid form requires refrigeration.
Viton is a registered Trademark of E.I. DuPont.
Fluorel is a registered Trademark of the 3M Company.
